Fitting Quencher Pump To Bladder
This part is what makes the magic happen. That water pumping directly into your mouth. No need to suck, just open and swallow. You will find you will drink less at a time but more frequently which is great to keep your hydration levels up. Check out our blog to see why its better to maintain your hydration rather than play catch up at the end of your race/ride.
We suggest that you wash your bladder out with warm water
using your preferred dishwashing liquid before your first use.
STEP 1 | Remove cover
STEP 2 | Fit 9volt batteries
STEP 3 | Refit cover
STEP 4 | Screw quencher cap assembly into bladder, hold the tongue and screw the cap all the way in to seal properly, can test by turning upside down
STEP 6 | Put helmet on with the nozzle in place. Thread the tubing through the top corner of the backpack. We like it going in from the opposite side of your tubing on your helmet..
STEP 7 | Move your head from side to side to check that you have enough tubing length before you cut off the excess. You don't want it to snag but you also dont want too much slack
STEP 8 | Make sure there's some water in it and switch it on
STEP 9 | Press button to pump out air and get ready for the water
So you're not a visual person - that's alright! - we get it
Click here to download the written instructions
